HDPE 5000S

Mô tả

InnoPlus HDPE 5000S là nhựa polyetylen mật độ cao mang lại sự cân bằng tốt về khả năng xử lý, tốc độ sản xuất cao, độ bền tuyệt vời và hình thức đẹp. InnoPlus HD5000S được khuyên dùng cho các ứng dụng sợi đơn hoặc sợi.

Thông số kỹ thuật

General

Material Status

Commercial: Active

Availability

Asia Pacific

Features

Food Contact Acceptable
High Density
Pleasing Surface Appearance

Uses

Agricultural Applications
Fishing Applications
Monofilaments
Netting
Rope
Yarn

Agency Ratings

FDA 21 CFR 177.1520

RoHS Compliance

RoHS Compliant

Forms

Pellets

Processing Method

Extrusion

Filament Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.954	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.80	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (25% Igepal, F50)	30.0	hr	ASTM D1693B
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	64		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	4120	psi
Break	5550	psi
Tensile Elongation (Break)	> 1000	%	ASTM D638
Apparent Bending Modulus	121000	psi	ASTM D747
Flexural Modulus	171000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	3.1	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	257	°F	ASTM D1525³
Peak Melting Temperature	257	°F	ASTM D3418

Additional Information	Nominal Value	Unit
Stretching Ratio	8 to 10
Stretching Temperature	207 to 212	°F

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	392 to 500	°F
Cylinder Zone 3 Temp.	392 to 500	°F
Cylinder Zone 5 Temp.	392 to 500	°F
Die Temperature	482 to 500	°F