SPDC FC21HN - Công ty TNHH Trao Đổi Hoàn Cầu

QAMAR FC21HN is a Linear Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, or North America for blown film.

General
Material Status	Commercial: Active
Availability	Africa & Middle East Asia Pacific Europe North America
Additive	Antiblock Slip
Features	Antiblocking General Purpose Medium Clarity Slip
Uses	Film General Purpose
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	0.918	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ISO 1872-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	1310	psi	ISO 1872-2
Tensile Strain (Break)	> 430	%	ISO 1872-2
Flexural Modulus	29000	psi	ISO 1872-2

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	1.2	mil
Tensile Modulus			ISO 527-3
MD : 1.2 mil	27600	psi	ISO 527-3
TD : 1.2 mil	31900	psi	ISO 527-3
Tensile Stress			ISO 527-3
MD : Break, 1.2 mil	7980	psi	ISO 527-3
TD : Break, 1.2 mil	5800	psi	ISO 527-3
Tensile Elongation			ISO 527-3
MD : Break, 1.2 mil	550	%	ISO 527-3
TD : Break, 1.2 mil	850	%	ISO 527-3
Dart Drop Impact (1.2 mil)	120	g	ISO 7765-1
Elmendorf Tear Strength			ISO 6383-2
MD : 1.2 mil	6.7	lbf	ISO 6383-2
TD : 1.2 mil	36	lbf	ISO 6383-2

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	55		ISO 868

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -94.0	°F	ISO 974
Vicat Softening Temperature	216	°F	ISO 306
Melting Temperature	252	°F	ISO 11357-3

Optical	Nominal Value	Unit	Test Method
Haze (1.18 mil)	11.0	%	ISO 14782

Extrusion	Nominal Value
Screw L/D Ratio	24.0:1.0
Extrusion Notes
Resin Temperature: 200°C Blow up ratio: 2.0 Extruder: 40 mm, L/D=24 Die Diameter: 75mm