Marlex D139FK - Công ty TNHH Trao Đổi Hoàn Cầu

This metallocene linear low density polyethylene is an ethylene-hexene copolymer tailored for blown film applications that require: Superb clarity, Excellent gloss, Exceptional toughness, Outstanding heat seal.

General
Material Status	Commercial: Active
Availability	Latin America North America
Additive	Antiblock: 5000 ppm Processing Aid Slip: 1000 ppm
Features	Antiblocking Copolymer Good Heat Seal Hexene Comonomer High Clarity High Gloss High Toughness Low Density Slip
Uses	Blown Film Packaging
Forms	Pellets
Processing Method	Blown Film Coextrusion

Physical	Nominal Value	Unit	Test Method
Density	0.918	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (Blown Film)	0.15		ASTM D1894

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	1.0	mil
Secant Modulus			ASTM D882
1% Secant, MD : 1.0 mil, Blown Film	24000	psi	ASTM D882
1% Secant, TD : 1.0 mil, Blown Film	27300	psi	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 0.98 mil, Blown Film	2030	psi	ASTM D882
TD : Yield, 0.98 mil, Blown Film	1450	psi	ASTM D882
MD : Break, 0.98 mil, Blown Film	8560	psi	ASTM D882
TD : Break, 0.98 mil, Blown Film	7110	psi	ASTM D882
Tensile Elongation			ASTM D882
MD : Break, 1.0 mil, Blown Film	450	%	ASTM D882
TD : Break, 1.0 mil, Blown Film	560	%	ASTM D882
Dart Drop Impact (0.98 mil, Blown Film)	540	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD : 0.98 mil, Blown Film	170	g	ASTM D1922
TD : 0.98 mil, Blown Film	440	g	ASTM D1922
Seal Initiation Temperature (1.0 mil, Blown Film)	216	°F	ASTM F88

Optical	Nominal Value	Unit	Test Method
Gloss (60°, 0.984 mil, Blown Film)	103		ASTM D2457
Haze (0.984 mil, Blown Film)	9.00	%	ASTM D1003