LLD FD21HS

Description

Qamar LLDPE FD21HS is a linear low-density Polyethylene material. It is available in North America for blown film or cast film. There are important attributes of Qamar FD21HS, such as anti-block, clarity, and slip.

Specification

General

Material Status

Commercial: Active

Availability

North America

Additive

Antiblock

Slip

Features

Antiblocking
General Purpose
High Clarity
Slip

Uses

Cast Film
Film
General Purpose

Forms

Pellets

Processing Method

Blown Film

Cast Film

Physical	Nominal Value	Unit	Test Method
Density	0.918	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	54		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			JIS K6760
Yield	1740	psi
Break	3770	psi
Tensile Strain (Break)	900	%	JIS K6760
Apparent Bending Modulus	37700	psi	ASTM D747
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	1.2	mil
Tensile Modulus			ISO IR 1184
MD : 1.2 mil	27600	psi
TD : 1.2 mil	30500	psi
Tensile Stress			JIS Z1702
MD : Break, 1.2 mil	5800	psi
TD : Break, 1.2 mil	5080	psi
Tensile Elongation			JIS Z1702
MD : Break, 1.2 mil	600	%
TD : Break, 1.2 mil	900	%
Dart Drop Impact (1.2 mil)	110	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD : 1.2 mil	30	g
TD : 1.2 mil	140	g

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -94.0	°F	ASTM D746
Vicat Softening Temperature	212	°F	ASTM D1525
Melting Temperature	252	°F	DSC

Optical	Nominal Value	Unit	Test Method
Haze (1.18 mil)	12.0	%	ASTM D1003

Extrusion	Nominal Value	Unit
Melt Temperature	338 to 374	°F
Melt Temperature (Aim)	356	°F
Extrusion Notes
Blow up Ratio: 2 to 4 Screw Type: LLDPE screw Die Lip Gap: 2.0 to 3.0 mm Air Ring: Single or Dual Slit (Wide die)

Related beads

Sabic 222NJ

Sabic 219NJ

SPDC FC21HN

LLDPE 218BJ

LLDPE 3470

ExxonMobil 3518CB

Lotrène Q2018N

LLDPE 5401GT

ExxonMobil 1002AY

ExxonMobil 1018MA

LLDPE SMART 183

LLD FD21HN