Lotrène Q1018H

Description

Lotrène® Q1018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure form as well as blended with other PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or co-extrusion process to modify film properties.

Datasheet

General
Material Status	Commercial: Active
Availability	Africa & Middle East Europe
Additive	Antiblock: 3200 ppm Erucamide Slip: 1500 ppm
Features	Antiblocking Butene Comonomer Slip
Uses	Agricultural Applications Bags Blending Consumer Applications Film Food Packaging Heavy-duty Bags Industrial Applications Liners Packaging Shrink Wrap Thin-walled Packaging
Agency Ratings	EC 1907/2006 (REACH) EU Food Contact
Processing Method	Blown Film Coextruded Film Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	0.920		ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Secant Modulus			ASTM D882
1% Secant, MD : 1.6 mil, Blown Film	35500	psi	ASTM D882
1% Secant, TD : 1.6 mil, Blown Film	31200	psi	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 1.6 mil, Blown Film	1600	psi	ASTM D882
TD : Yield, 1.6 mil, Blown Film	1600	psi	ASTM D882
MD : Break, 1.6 mil, Blown Film	4790	psi	ASTM D882
TD : Break, 1.6 mil, Blown Film	5510	psi	ASTM D882
Tensile Elongation			ASTM D882
MD : Break, 1.6 mil, Blown Film	850	%	ASTM D882
TD : Break, 1.6 mil, Blown Film	800	%	ASTM D882
Dart Drop Impact (1.6 mil, Blown Film)	150	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD : 1.6 mil, Blown Film	480	g	ASTM D1922
TD : 1.6 mil, Blown Film	280	g	ASTM D1922