HDPE 7000F PTT

Description

InnoPlus HDPE 7000F is a high-density polyethylene film grade well-known for its high-quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness, and good heat sealability. It is suitable for producing general-purpose packaging films in a wide range of sizes and thicknesses.

Specification

General
Material Status	Commercial: Active
Availability	Asia Pacific
Features	Food Contact Acceptable Good Heat Seal Good Stiffness High Density High Strength
Uses	Bags Film Laundry Bags Packaging
Agency Ratings	FDA 21 CFR 177.1520
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.956	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.040	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (25% Igepal, F50)	> 1000	hr	ASTM D1693B
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	64		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	4270	psi
Break	5550	psi
Tensile Elongation (Break)	820	%	ASTM D638
Apparent Bending Modulus	135000	psi	ASTM D747
Flexural Modulus	171000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	5.5	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	257	°F	ASTM D1525³
Peak Melting Temperature	257	°F	ASTM D3418

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	356 to 392	°F
Cylinder Zone 3 Temp.	356 to 392	°F
Cylinder Zone 5 Temp.	356 to 392	°F
Die Temperature	374 to 410	°F