HDPE FILM HD3355F

Description

InnoPlus HDPE 3355F is produced by a slurry process, a technology licensed by Mitsui. This grade has well balance property of optical property, mechanical property, and processability. The special characteristic of this grade consists of low gel content, stiffness, and packing properties. This grade is suitable for high-quality film, produced by the co-extrusion process.

Specification

General
Material Status	Commercial: Active
Availability	Asia Pacific
Features	Food Contact Acceptable Good Stiffness High Density Low Gel
Uses	Film Laminates Packaging Tubing
Agency Ratings	FDA 21 CFR 177.1520
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Coextrusion

Physical	Nominal Value	Unit	Test Method
Density	0.951	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.1	g/10 min	ASTM D1238
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	3410	psi
Break	5260	psi
Tensile Elongation (Break)	> 1000	%	ASTM D638
Apparent Bending Modulus	107000	psi	ASTM D747
Flexural Modulus	156000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	2.6	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	252	°F	ASTM D1525²
Peak Melting Temperature	268	°F	ASTM D3418

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	338 to 374	°F
Cylinder Zone 3 Temp.	338 to 374	°F
Cylinder Zone 5 Temp.	338 to 374	°F
Die Temperature	374 to 392	°F

Related beads

HDPE H5480S

Long Sơn 5604F

HDPE DMDZ 6147

HDPE B4660

Long Sơn 5840B

HDPE JV060U BRASKEM

InnoPlus HD1600J

InnoPlus HD2308J

HDPE 7000F PTT

HDPE MF5000 LOTTE

HDPE F00952

InnoPlus HD2208J