Exceed 2012RA Data Sheet - Globexvn.com

ExxonMobil Exceed 2012RA

Thương hiệuExxonMobil

Chỉ số chảy

2

Mã nhựa

LLDPE

Liên hệ tư vấn

Loại: Exceed 2012RA
Xuất xứ: Singapore
Thương hiệu: ExxonMobil
Ứng dụng: Màng co thực phẩm

Mô tả

Nhựa ExxonMobil Exceed 2012RA xuất xứ Singapore có chỉ số chảy (MI) = 2. Ứng dụng: Màng co thực phẩm.

Datasheet

General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Additive
Heat Stabilizer
Processing Aid
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.914
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
2.0
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus ASTM D882
1% Secant, MD
14700
psi
 ASTM D882
1% Secant, TD
14900
psi
 ASTM D882
Tensile Strength ASTM D882
MD : Yield
907
psi
 ASTM D882
TD : Yield
863
psi
 ASTM D882
MD : Break
10400
psi
 ASTM D882
TD : Break
8250
psi
 ASTM D882
Tensile Elongation ASTM D882
MD : Break
560
%
 ASTM D882
TD : Break
610
%
 ASTM D882
Dart Drop Impact
690
g
 ASTM D1709A
Elmendorf Tear Strength ASTM D1922
MD
240
g
 ASTM D1922
TD
300
g
 ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
33
 
 ASTM D2457
Haze
21.1
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.

Fluoropolymers, or fluorine-containing compounds, and tris(nonylphenol) phosphite (TNPP) CAS# 26523-78-4 are not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for their presence, based on product composition knowledge these substances are not expected to be present. However, the fact that these substances are not intentionally used by ExxonMobil in this product does not exclude that trace levels of these substances may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.