Nhựa ExxonMobil EXCEED XP 7021RA NATURAL xuất xứ Singapore có chỉ số chảy (MI) = 0.2. Ứng dụng: Bao bì thực phẩm.

General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Additive
Heat Stabilizer
Processing Aid
Forms
Pellets
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.913
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
0.20
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus ASTM D882
1% Secant, MD
17300
psi
ASTM D882
1% Secant, TD
22700
psi
ASTM D882
Tensile Strength ASTM D882
MD : Yield
999
psi
ASTM D882
TD : Yield
1040
psi
ASTM D882
MD : Break
10700
psi
ASTM D882
TD : Break
10400
psi
ASTM D882
Tensile Elongation ASTM D882
MD : Break
360
%
ASTM D882
TD : Break
600
%
ASTM D882
Dart Drop Impact
1100
g
ASTM D1709A
Elmendorf Tear Strength ASTM D1922
MD
42
g
ASTM D1922
TD
210
g
ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
52
 
ASTM D2457
Haze
8.40
%
ASTM D1003
Legal Statement
Exceed™ XP 7021ML can in principle be used in food contact applications in all EU Member States and in the USA (FDA). Migration or use limitations may apply. Please contact your ExxonMobil Chemical representative for more detailed information and/or actual compliance certification documents for the specific grade of interest.


This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use. For detailed Product Stewardship information, please contact Customer Service.

Fluoropolymers, or fluorine-containing compounds, and tris(nonylphenol) phosphite (TNPP) CAS# 26523-78-4 are not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for their presence, based on product composition knowledge these substances are not expected to be present. However, the fact that these substances are not intentionally used by ExxonMobil in this product does not exclude that trace levels of these substances may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.