Nhựa ExxonMobil EXCEED XP 6026ML NATURAL xuất xứ Singapore có chỉ số chảy (MI) = 0.2. Ứng dụng: Bao bì thực phẩm.

General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Additive
Exceed XP 6026ML: Heat Stabilizer; Processing Aid
Exceed XP 6026MQ: Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.918
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
0.20
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus ASTM D882
1% Secant, MD
26300
psi
ASTM D882
1% Secant, TD
32200
psi
ASTM D882
Tensile Strength ASTM D882
MD : Yield
1290
psi
ASTM D882
TD : Yield
1430
psi
ASTM D882
MD : Break
9430
psi
ASTM D882
TD : Break
9730
psi
ASTM D882
Tensile Elongation ASTM D882
MD : Break
390
%
ASTM D882
TD : Break
640
%
ASTM D882
Dart Drop Impact 
680
g
ASTM D1709
Elmendorf Tear Strength ASTM D1922
MD
56
g
ASTM D1922
TD
400
g
ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
44
 
ASTM D2457
Haze
12.0
%
ASTM D1003
Legal Statement
This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use. For detailed Product Stewardship information, please contact Customer Service.

Exceed™ XP 6026 can in principle be used in food contact applications in all EU Member States and in the USA (FDA). Migration or use limitations may apply. Please contact your ExxonMobil Chemical representative for more detailed information and/or actual compliance certification documents for the specific grade of interest.

Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.