Enable™ 4002MC Blown Data Sheet Globexvn.com
  1. Trang chủ
  2. Hạt nhựa nguyên sinh
  3. Hạt nhựa Enable
  4. Enable 4002MC NATURAL

Enable 4002MC NATURAL

Thương hiệuExxonMobil

Chỉ số chảy

0.25

Mã nhựa

Enable

Liên hệ tư vấn

Loại: Enable 4002MC NATURAL
Xuất xứ: Singapore
Thương hiệu: ExxonMobil
Ứng dụng: Film.

Mô tả

Nhựa ExxonMobil Enable 4002MC NATURAL xuất xứ Singapore có chỉ số chảy (MI) = 0.25. Ứng dụng: Film.

Datasheet

General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Additive
Enable 4002MC: Heat Stabilizer; Processing Aid
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.940
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
0.25
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus ASTM D882
1% Secant, MD
77900
psi
 ASTM D882
1% Secant, TD
106000
psi
 ASTM D882
Tensile Strength ASTM D882
MD : Yield
2830
psi
 ASTM D882
TD : Yield
3500
psi
 ASTM D882
MD : Break
9680
psi
 ASTM D882
TD : Break
7040
psi
 ASTM D882
Tensile Elongation ASTM D882
MD : Break
490
%
 ASTM D882
TD : Break
810
%
 ASTM D882
Dart Drop Impact
63
g
 ASTM D1709
Elmendorf Tear Strength ASTM D1922
MD
14
g
 ASTM D1922
TD
600
g
 ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
26
 
 ASTM D2457
Haze
21.0
%
 ASTM D1003
Legal Statement
Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.