Enable 2010 Series Blown data sheet
Enable 2010 Series Blown data sheet
  • Enable 2010 Series Blown data sheet
  • Enable 2010 Series Blown data sheet
  1. Trang chủ
  2. Hạt nhựa nguyên sinh
  3. Hạt nhựa Enable
  4. Enable 2010MA

Enable 2010MA

Thương hiệuExxonMobil

Chỉ số chảy

1

Mã nhựa

Enable

Liên hệ tư vấn

Loại: Enable 2010MA
Xuất xứ: Singapore
Thương hiệu: ExxonMobil
Ứng dụng: Film, màng co.

Mô tả

Nhựa ExxonMobil Enable 2010MA xuất xứ Singapore có chỉ số chảy (MI) = 1. Ứng dụng: Film, màng co.

Datasheet

General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Additive
Enable™ 2010ME: Antiblock: 2000 ppm; Heat Stabilizer; Processing Aid; Slip: 500 ppm
Enable™ 2010PA: Heat Stabilizer
Enable™ 2010MA: Heat Stabilizer; Processing Aid
Forms
Pellets
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.922
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
1.0
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus ASTM D882
1% Secant, MD
29400
psi
 ASTM D882
1% Secant, TD
33300
psi
 ASTM D882
Tensile Strength ASTM D882
MD : Yield
1400
psi
 ASTM D882
TD : Yield
1500
psi
 ASTM D882
MD : Break
7940
psi
 ASTM D882
TD : Break
7470
psi
 ASTM D882
Tensile Elongation ASTM D882
MD : Break
510
%
 ASTM D882
TD : Break
720
%
 ASTM D882
Dart Drop Impact
180
g
 ASTM D1709A
Elmendorf Tear Strength ASTM D1922
MD
130
g
 ASTM D1922
TD
550
g
 ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
62
 
 ASTM D2457
Haze
7.00
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.

Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.